4.2.7 SNMP
Note this function is NOT applicable to GV-SD2322-IR.
Users can transfer the configurations of the device through SNMP protocol to communicate
with and/or integrate it into a central server.
Figure 4-12
◼ SNMP Type: Select the type of SNMP desired, between SNMPv3 and SNMPv2.
◼ Authentication Mode: Define a desired password for authentication between the device
and the central server.
◼ Encryption Mode: Define a desired password for encryption that needs to be matched
by the central server.
Click Save for the changes to take effect.
To Next Page
Loading...
Need help?
General
