GeoVision GV-IP SERIES User Manual

Administrator Mode
55
4
4.4.3 PTZ Limit
Users can set PTZ limitations to prevent the camera from hitting obstacles such as walls.
Note this function is NOT applicable to GV-SD2322-IR.
Figure 4-22
1. Click Start PTZ Limit to enable the function.
2. Adjust the dome view in such a way that it reaches the PTZ limit you want to set.
3. Click to set the position relative to the current dome view as a limit. For example, click
the at the top to set the upper limit.
4. Repeat Step 2 & 3 to set all limits as needed and click Save.

GeoVision GV-IP SERIES Specifications

General

Brand	GeoVision
Model	GV-IP SERIES
Category	Security Camera
Language	English