GeoVision GV-IP SERIES User Manual

56
4.4.4 Remote Control
Note this function is NOT applicable to GV-SD2322-IR.
You can connect a third-party PTZ remote control program to your GV-IP Speed Dome once
this function is enabled.
Figure 4-23
1. Specify the Listener Port to which the third-party PTZ remote control program connects.
2. Assign an individual Address Code (between 0 ~ 255) to each PTZ remote control
program
3. Click Save.
Note: For this function, your router needs to support port forwarding.

GeoVision GV-IP SERIES Specifications

General

Brand	GeoVision
Model	GV-IP SERIES
Category	Security Camera
Language	English