GeoVision GV-IP SERIES User Manual

Administrator Mode
57
4
4.4.5 Patrol
Note this function is NOT applicable to GV-SD2322-IR.
You can set the camera to take a snapshot and upload the image to the FTP server when
the camera goes to the preset during the patrol route.
Figure 4-24
1. Enable Preset Snapshot.
2. Type the Resume Patrol(s) interval in seconds to upload snapshots.
3. Click Save.
Note: For this function, make sure to configure the settings in 4.8.3 FTP first.

GeoVision GV-IP SERIES Specifications

General

Brand	GeoVision
Model	GV-IP SERIES
Category	Security Camera
Language	English