GeoVision GV-IP SERIES User Manual

Administrator Mode
51
4
4.3.4 ROI
When Region of Interest (ROI) is enabled, the system ensures image quality for ROI first if
the bit rate is insufficient. Note this function is NOT applicable to GV-SD2322-IR.
Figure 4-18
1. Click to enable and add ROI.
2. Click and drag on the image to specify an area.
3. To add additional ROI areas, repeat steps 1 and 2. Up to eight ROI areas can be
specified.
4. To delete an ROI area, click .

GeoVision GV-IP SERIES Specifications

General

Brand	GeoVision
Model	GV-IP SERIES
Category	Security Camera
Language	English