Min. Pupillary Distance (px): Click Draw and draw in the live view window.
Counting: To count the number of people entering / exiting in the detection area,
enable this function. To display the counting results in the live view window, select
People Counting in OSD settings. Refer to 4.5.2 OSD for details.
Face Overlay: Enable to include the camera’s text overlay on the snapshot(s)
captured. (Only for GV-SD2722-IR / SD3732-IR)
[Face Selection]
Selection Mode: Select Effect Priority for the best image quality of the captured
snapshots, Speed Priority for optimal snapshots from the moment of detection
until the specified timeout is up, and Period Selection for a snapshot captured in
every selection period. For example, if Period Selection is set to 500 millisecond
(ms), the camera selects a face snapshot every 500 ms.)
Number of Selected Photos: Set 1 ~ 3 selected photos for different selection
modes.
Filter by Angle: Enable this function to set the desired face angle for detection.
3. Under Trigger Actions, select Upload Image (Original) to upload a snapshot of the
entire image and a snapshot of the face detected upon face detection. Select Upload
Image (Target) to upload only the snapshot of the face detected.
4. For Plan, follow Step 6, 4.6.2 Cross Line.
To Next Page
Loading...
Need help?
General
