Introduction
1
No. Name Function
1
Video Input 4 plugs for video inputs.
2
Speaker Output A plug for the speaker device.
3
Audio Input Each plug is for 2 audio inputs.
4 Reset
It reboots the GV-Video Server, and keeps all current
configurations.
5 Default Button
It resets all configurations to their factory settings. See 6.4
Restoring to Factory Default Settings.
6
Disk Full/Fault
LED
This LED is on, indicating the hard drive is full or faulty.
7 Ready LED
This LED is on, indicating the GV-Video Server is ready for
connection.
8
Power LED This LED is on, indicating the power is supplied.
7
To Next Page
Loading...
Need help?
General
