6-16 Using
To change settings, use the options menu. (See “Options Menu” later for
information.)
3. Click the floating button to start scanning. While scanning is in progress, the
button’s color is orange.
Idle Scanning
4. The result window as below appears. The Card Type field shows which type of
tags are being scanned now. If a tag of the matching type is found, the Card
UID field shows its UID; otherwise the field is blank.
Click OK to close the window.
5. The program scans for 3 seconds for each tag type (14443-A, 14443-B, and
15693). The scanning stops after 9 seconds.
6. When you next start a scanning session, it begins with the last scanned card
type in the previous session.
To Next Page
Loading...
