Getac S400 User Manual

5-4 Using BIOS Setup and System Recovery
Main Menu
The Main menu contains the various system settings.
Information
Main
Advanced
Security
Boot
Exit
System Date:
System Time:
Legacy USB Support:
Wireless LAN:
Bluetooth:
[06/29/2012]
[11:33:08]
[Enabled]
[Last State]
[Last State]
Item Specific Help
View or set system
date.
F1 Help ↑↓ Select Item +/- Change Values F9 Setup Defaults
Esc Exit ←→ Select Menu Enter Select  Sub-Menu F10 Save and Exit
System Date sets the system date.
System Time sets the system time.
Legacy USB Support enables or disables the system’s support for Legacy USB device
in DOS mode.
Wireless LAN specifies the on/off state of the wireless LAN radio when the system
starts up. When set to Last State , the on/off state remains the same as the last
state before you turn off the system.
Bluetooth specifies the on/off state of the Bluetooth radio when the system starts
up. When set to Last State , the on/off state remains the same as the last state
before you turn off the system.
06

Getac S400 Specifications

Power

ac adapter power	90W
ac adapter voltage	100-240V
ac adapter frequency	50/60Hz

Battery

battery capacity	8700mAh
battery type	9 cells Li-Ion

Temperature

operating temperature range	0°C to 60°C
storage temperature range	-40°C to 71°C
humidity	95% RH, non-condensing

System Memory

default memory	4GB DDR3
maximum memory	8GB
memory type	DDR3

Display

display size	14 inches
display resolution	1366 x 768
optional display brightness	800 NITs

Ports & Interfaces

usb 3.0 ports	3
usb 2.0/eSATA combo port	1
serial port	RS-232 x 1

Weight and Dimensions

dimensions	348 x 258 x 49.2 mm
weight	2.9 kg