Getac S400 User Manual

3-10 Managing Power
Power-Saving Tips
Aside from enabling your computer’s power saving mode (see previous section),
you can do your part to maximize the battery’s operating time by following these
suggestions.
 Enter into power saving mode when using battery power.
 Do not disable Power Management.
 Decrease the LCD brightness to the lowest comfortable level.
 Shorten the length of time before Windows turn off the display.
 Many USB devices use power just by being connected. If you use a USB mouse,
you can save power by disconnecting the mouse and using the touchpad. If
you use a USB flash drive, unplug it when you are not using it.
 Remove the card (such as PC card, ExpressCard, and Smart Card) if not using
it.
 Turn off the wireless radio if you are not using the wireless module (such as
WLAN, Bluetooth, or WWAN).
 Turn off the computer when you are not using it.

Getac S400 Specifications

Power

ac adapter power	90W
ac adapter voltage	100-240V
ac adapter frequency	50/60Hz

Battery

battery capacity	8700mAh
battery type	9 cells Li-Ion

Temperature

operating temperature range	0°C to 60°C
storage temperature range	-40°C to 71°C
humidity	95% RH, non-condensing

System Memory

default memory	4GB DDR3
maximum memory	8GB
memory type	DDR3

Display

display size	14 inches
display resolution	1366 x 768
optional display brightness	800 NITs

Ports & Interfaces

usb 3.0 ports	3
usb 2.0/eSATA combo port	1
serial port	RS-232 x 1

Weight and Dimensions

dimensions	348 x 258 x 49.2 mm
weight	2.9 kg