Getac S400 User Manual

8-10 Troubleshooting
battery power is too low for the heating to complete, the computer may not start
up. In case the computer fails to start up, turn off the computer and leave it
in room temperature for about an hour before trying to turn it on again.
When you turn on the computer, it stops after POST.
 Restart your computer.
WLAN Problems
I cannot use the WLAN feature.
 Make sure that the mini PCI-E WLAN card is correctly installed.
 Make sure that the WLAN feature is turned on.
Transmission quality is poor.
 Your computer may be in an out-of-range situation. Move your computer closer
to the Access Point or another WLAN device it is associated with.
 Check if there is high interference around the environment and solve the problem
as described next.
Radio interference exists.
 Move your computer away from the device causing the radio interference such
as microwave oven and large metal objects.
 Plug your computer into an outlet on a different branch circuit from that used
by the affecting device.
 Consult your dealer or an experienced radio technician for help.
I cannot connect to another WLAN device.
 Make sure that the WLAN feature is turned on.
 Make sure that the SSID setting is the same for every WLAN device in the
network.

Getac S400 Specifications

Power

ac adapter power	90W
ac adapter voltage	100-240V
ac adapter frequency	50/60Hz

Battery

battery capacity	8700mAh
battery type	9 cells Li-Ion

Temperature

operating temperature range	0°C to 60°C
storage temperature range	-40°C to 71°C
humidity	95% RH, non-condensing

System Memory

default memory	4GB DDR3
maximum memory	8GB
memory type	DDR3

Display

display size	14 inches
display resolution	1366 x 768
optional display brightness	800 NITs

Ports & Interfaces

usb 3.0 ports	3
usb 2.0/eSATA combo port	1
serial port	RS-232 x 1

Weight and Dimensions

dimensions	348 x 258 x 49.2 mm
weight	2.9 kg