GHL ProfiLux 4 - Device Functions and Capabilities; Core Functionality Overview

Instruction Manual ProfiLux 4 / 4e
EN 2019-01-22 13
The DCF receiver receives radio signals from a DCF77 station at Frankfurt. As with any device
that works with radio, interference may result from electrical equipment, poor reception, or
the like. In most cases it helps to place the receiver at a more favorable place.
3.2.12 AUX Connection
This Mini-DIN socket can be used to connect devices with AUX plugs.
3.2.13 Power Supply Input
12V DC hollow socket for connection to the power supply. Use only the original power supply
for supplying power to the ProfiLux 4 Controller.
4 Functions of the ProfiLux 4 / 4e
4.1 Functionality of the ProfiLux 4 / 4e
ProfiLux 4 / 4e can reliably and accurately measure and control all the important parameters
and thus help you in obtaining the sensitive biological balance in your aquarium, terrarium
or pond.
Depending on the model and application, examples are: Water temperature, pH,
Conductivity, Redox potential, Level, Flow, Oxygen content, Air temperature or humidity.
The controller monitors and controls heater, ground heater and cooling operations. The
sequence control with intelligent and self-learning intermittent wipers always ensures
optimal heating with pinpoint accuracy. If desired, a nightly temperature decrease can be
programed.
DANGER
• Connecting a non-GHL branded power supply may lead to the
destruction of the ProfiLux 4 / 4e!
• A repair caused by this is not a guarantee and is therefore subject
to a charge.