To Next Page

To Previous Page

Instruction Manual ProfiLux 4 / 4e

EN 2019-01-22 21

5.4.3 Powerbar5.1-PAB

This Powerbar is connected to a PAB port of the ProfiLux 4.

The ProfiLux Aquatic Bus enables secure and reliable communication with ProfiLux 4.

Features:

• 5 independent switchable sockets, one of these can also be dimmed

• 1 additional socket with permanent power (e.g. for ProfiLux, pumps or lamps)

• Loads with up to 15 Ampere can be switched (depending on the country version)

• Built-in overvoltage protection

• Illuminated switch with circuit breaker function (UK-model without circuit breaker

function)

• Freely programmable initial state of the sockets after 30 seconds without

communication

Please also refer to the section "Establishing the PAB connection".

5.5 Connection of Luminaires

5.5.1 Connection of Dimmable Luminaires or Lightbars

The control cables of dimmable luminaires (GHL ALB tubular light bar, Mitras-Simu-Stick) are

plugged into the Yellow Western sockets of the ProfiLux 4.

GHL luminaires do not need to be connected to the STDL4-4 Powerbar, they are instead

connected to a permanently live socket since the on/off switching of GHL luminaires takes

place via the control cable.

Other manuals for GHL ProfiLux 4

Questions and Answers:

Need help?

Do you have a question about the GHL ProfiLux 4 and is the answer not in the manual?

General