Instruction Manual ProfiLux 4 / 4e
EN 2019-01-22 9
3.2 3.2 Connection Overview
The total of all available inputs and outputs in the ProfiLux 4 / 4e is referred to as resources.
The ProfiLux 4 controller includes the following connection ports:
• Connect only original accessories from GHL.
• Do not use force when plugging connectors. If a plug contact does
not fit, it is imperative to check that you have chosen the correct
socket.
DANGER
• Incorrect connection (For example, plugging a lighting unit plug into
a PAB connection) can lead to damaging the ProfiLux 4 and/or the
light bar!
• A repair caused by this, is not covered under warranty and will
therefore incur repair charges.
To Next Page
Loading...
