14
Installation
GBF-70 Fryer
Installation is now complete and the appliance is ready for use. Please carefully read the remainder of this Manual
to become familiar with all controls, functions, operational procedures and necessary maintenance procedures
before attempting to use the appliance for the first time.
Disassemble and thoroughly clean all parts of the filter pan to remove residue which may remain from manufacturing
processes, or dirt and debris that may have accumulated during warehousing and shipment. For details, see Section
4.02, Cleaning the Filter Pan & Refreshing Filter Media.
Wash all of the accessory items included with the fryer (cooking baskets, basket carriers, screens, utensils, tools, etc) in
warm soapy water, rinse and dry thoroughly.
Inspect unit for any adhesive plastic protective film which may remain on sheet metal surfaces. Some film is typically
left in place as added protection during storage and shipment. Remove all such material and clean the entire exterior of
the unit with a good quality stainless steel cleaner/polish. DO NOT use cleaners that are abrasive or contain caustic
chemicals.
2.09.5 Clean Filter Pan, Accessories & Appliance
2.09.6 Optional KITCHENTRAC
™
Remote Equipment Monitoring
If your new equipment is factory‐equipped with optional Giles’ KITCHENTRAC™ remote
monitoring, an account must first be created before the feature can be used. A one‐time
activation fee (per business establishment) and a monthly subscription (per controller
monitored) will be required.
After appliance installation is complete and an account has been set‐up, the appliance must be connected to the
business establishment’s local wifi network, and subsequently to the KITCHENTRAC™ server. A wireless router
which provides a continuous open connection to the internet, and is located within range of the monitored
appliance, is required.
A detailed WiFi Connection Manual (Form #66313) should have been packed with the unit. Before the monitoring
service is active, the steps outlined must be completed. If you have purchased a banked system, the set up
procedure must be performed for each controller. If needed, Appendix A in the back of this manual also explains
the connection process.
Once the connection process has been completed, you will be able to monitor appliance performance, productivity,
menu trends, operational status, etc. and access the availabl;e analytics by simply logging‐in to the KitchenTrac™
website from any computer or remote device (smart‐phone, laptop, or tablet).
To Next Page
Loading...
