64
Cleaning & Maintenance
GBF-70 Fryer
7. Using a non‐detergent, bio‐degradable degreasing cleaner, such as Simple Green® Crystal Foaming Cleaner,
thoroughly clean the filter pan ⑦. Rinse thoroughly with hot water spray and dry completely. Flush out the
hoses to remove any filter sediment that may have gotten into them, then be certain that all residual water is
drained out.
8. Ensure that all parts are completely dry. Reassemble filter pan assembly as shown, using fresh filter media.
Use only one (1) sheet of properly sized filter paper, placin it on top of Support Screen. Be sure that media is
the correct size and is properly installed underneath the Hold‐down Frame ③ and that all four (4) Locking
Levers are securely engaged with the studs.
9. Position assembled filter pan under the unit and re‐connect filter pan hose ⑧ to
the fryer coupling (push in slip‐ring while inserting hose fitting). The connection
must be tight and secure for proper operation.
5.03 Cleaning the Filter Pan & Refreshing Filter Media - continued
Optional Filter Screen Note:
When opting to use the sustainable Stainless Steel Filter Screen, purchased separately from Giles, please follow
the usage and cleaning instructions provided with the item. This item is an alternative substitute for filter paper
and is NOT to be use in addition to filter paper. With proper cleaning and care, the screen should provide many
months of dependable service.
Thoroughly wash and clean the screen periodically ... wash using ONLY
clean hot water and a stiff bristle brush.
DO NOT
use soap, or other cleaners. Shake off excess water and blot dry with clean towel (ideally screen should
dry overnight) before reinstalling.
8
To Next Page
Loading...
