GKB 4CH/8CH VFire Server
62
default one each time the login dialog is shown, so the user doesn’t bother to
enter the text to login the system.
n ESC (Mouse: Right Click)
Press this button to escape from this screen, and return to Setup Menu display.
If the Save dialog is shown, press ENTER to exit and save, ESC (Mouse: Right
Click) to exit without saving.
Following is a brief description for each item and its specific operations:
n Local Guest Level – the local access level (Administrator, Supervisor, Operator, -,
or any user) without login the system. Press +/- buttons to change the level.
n Remote Guest Level – the remote access level without login the system. Press
+/- buttons to change the level.
n Auto Logout – auto logout, if there’s no user’s operation in 1 minute to 24 hours,
or not (“-“). Press +/- buttons to change the value.
n Login Name – please follow the Text Input method described in Section 4.1 to
modify this item.
n Password – this item accepts numbers only. Please follow the Text Input
method described in Section 4.1 to modify this item.
n Level – the password level (Administrator, Supervisor, Operator, or Customized)
for this user. Press +/- buttons to change the level.
n Adv. – press ENTER (Mouse: Left click) to call up Advanced User Setup as
shown below.
The Advanced User Setup allows
the administrator to setup each
user’s detailed access right of the
system.
The general operations are as
below:
n ▲▼◄►
Press these buttons to move the focus. If the selected item is not shown
on the screen, the screen will scroll up or down.
To Next Page
Loading...