GKB 4CH - Page 63

GKB 4CH/8CH VFire Server
63
n ESC (Mouse: Right Click)
Press this button to escape from this screen, and return to Password Setup
display. The Password Setup contents will be updated accordingly.
Following is a brief description for each item and its specific operations:
n Monitor Channel 1-8/4 – the user can only monitor those channels
“checked”. Press ENTER or +/- (Mouse: Left click) to check/uncheck this
item.
n X2 – to enable the user to do X2 operation for live/playback video if
“checked”. Press ENTER or +/- (Mouse: Left click) to check/uncheck this
item.
n PTZ – to enable the user to do PTZ operation if “checked”. Press ENTER or
+/- (Mouse: Left click) to check/uncheck this item.
n GPS/POS/OSD Display – to enable the user to change GPS/POS/OSD
Display if “checked”. Press ENTER or +/- (Mouse: Left click) to
check/uncheck this item.
n Volume – to enable the user to change volume if “checked”. Press ENTER
or +/- (Mouse: Left click) to check/uncheck this item.
n Video Adjustment – to enable the user to do video adjustment operation if
“checked”. Press ENTER or +/- (Mouse: Left click) to check/uncheck this
item.
n Display – to enable the user to change display settings if “checked”. Press
ENTER or +/- (Mouse: Left click) to check/uncheck this item.
n Playback – to enable the user to playback video/audio if “checked”. Press
ENTER or +/- (Mouse: Left click) to check/uncheck this item.
n Backup – to enable the user to backup video/audio if “checked”. Press
ENTER or +/- (Mouse: Left click) to check/uncheck this item.
n Configuration Backup/Restore – to enable the user to backup/restore
configurations if “checked”. Press ENTER or +/- (Mouse: Left click) to
check/uncheck this item.
n Setup Camera – to enable the user to do Camera Setup if “checked”.
Press ENTER or +/- (Mouse: Left click) to check/uncheck this item.