TX6600PRO INSTRUCTION MANUAL
13
ON/OFF AND VOLUME
Rotate the Volume Knob clockwise past the ‘click’ to switch the radio on.
Continue to rotate the Volume Knob clockwise to increase the volume.
Rotate the Volume Knob counter-clockwise to decrease the volume. Continue to
rotate the Volume Knob counter-clockwise past the ‘click’ to switch the radio o.
NOTE: If there are no signals available when adjusting the volume, set the
Volume knob to the 10 o’clock position. This should ensure sucient volume to
hear incoming signals when they occur.
SELECTING CHANNELS
To select a channel, rotate the Channel knob or press the keys. The
selected channel will be shown on the display. If Channel Announce is On, the
channel number will be announced.
TRANSMITTING
Before transmitting, check to see if the channel is already in use (the icon
will be visible). If the channel is busy, you should wait until it is clear before
transmitting.
NOTE: If the Busy Lockout feature is enabled in your radio’s menu, your radio
will automatically prevent you from transmitting while the channel is busy.
To transmit:
1. Press and hold the PTT (Push-to-Talk) key.
2. Hold the radio 3-5cm from your mouth and speak into the microphone
at a normal voice level. The microphone is quite sensitive so it is not
necessary to raise your voice or shout.
3. Release the PTT key when you have nished talking.
When transmitting, the status LED lights Red and the icon appears on the
LCD.
To Next Page
Loading...
