TX6600PRO INSTRUCTION MANUAL
29
BEEPS
The TX6600PRO uses Beeps to provide audible feedback whenever a key is
pressed or to notify you of various alarms and timers.
The beep setting can be adjusted in the menu.
To adjust the Beep setting:
1. Hold the
MENU
F
key to access the menu. The last selected menu item
will be displayed.
2. Rotate the Channel knob or press the keys until BEEP is
displayed.
3. Press the
MENU
F
key.
4. Rotate the Channel knob or press the keys to select ON, OFF
or ALT.
• ON: The radio will beep whenever a key is pressed or when an
alert is required.
• OFF: All Beeps are inhibited.
• ALT: The radio will only beep when an alert is required. Key beeps
are inhibited.
5. When the desired setting is displayed, press the
MENU
F
key to exit the
menu or wait a few seconds for the menu to time-out.
NOTE: If both Channel Announce and Beep are set to ON, channel announcements
will override key beeps when changing channels.
CHANNEL ANNOUNCE
Channel Announce provides an audible voice that speaks the channel number
whenever a channel is selected. Channel Announce has two settings: ON or OFF.
When Channel Announce is set to ON, the channel number will be announced
whenever a channel is selected.
NOTE: If Key Beeps are switched ON, Channel Announcements will override the key
beeps when changing channels.
To Next Page
Loading...
