TX6600PRO INSTRUCTION MANUAL
21
To enable or disable Duplex on a repeater channel
1. Select the required channel 1 – 8 or 41 – 48.
2. Look for the Duplex icon on the left of the display.
i. If the icon is visible, Duplex is currently enabled on the
selected channel. To disable Duplex operation, press
MENU
F
then
PRO
DUP
. The icon will disappear. The channel is now
operating in Simplex mode.
ii. If the icon is NOT visible, the selected channel is not
enabled for duplex operation. To enable Duplex, press
MENU
F
then
PRO
DUP
. The icon will appear. The channel is now
operating in Duplex mode.
PRO KEY
The PRO key is a programmable key that can be used to provide a shortcut to a
user-assigned function. Once a function has been assigned, pressing the
PRO
DUP
key
will immediately activate that function.
To assign a function to the PRO key:
1. Hold the
MENU
F
key to access the menu. The last selected menu item
will be displayed.
2. Rotate the Channel knob or press the keys until PROKEY is
displayed.
3. Press the
MENU
F
key.
4. Rotate the Channel knob or press the keys to select from
DW/TW, SQLLVL, DISP, RECALL, PWRSAV or BEEP (see list below for
details).
5. When the desired function is displayed, press the
MENU
F
key to exit the
menu or wait a few seconds for the menu to time-out.
A full description of the operation of each of these functions is included elsewhere
in this manual.
To Next Page
Loading...
