GME TX6600PRO - Narrow Band Filter

TX6600PRO INSTRUCTION MANUAL
28
To enable Dynamic Volume Control
1. Hold the
MENU
F
key to access the menu. The last selected menu item
will be displayed.
2. Rotate the Channel knob or press the keys until DYNVOL is
displayed.
3. Press the
MENU
F
key.
4. Rotate the Channel knob or press the keys to select ON or
OFF.
5. When the desired setting is displayed, press the
MENU
F
key to exit the
menu or wait a few seconds for the menu to time-out.
LCD BACKLIGHT
The LCD is backlit for easy viewing in low light conditions. Whenever a key is
pressed the backlight will switch on. After 5 seconds of inactivity it will switch o
again automatically to conserve power.
The backlight settings can be adjusted in the menu.
To adjust the backlight settings:
1. Hold the
MENU
F
key to access the menu. The last selected menu item
will be displayed.
2. Rotate the Channel knob or press the keys until BACKLT is
displayed.
3. Press the
MENU
F
key.
4. Rotate the Channel knob or press the keys to select ON, OFF
or AUT.
• ON: The backlight is always On
• OFF: The backlight is always O
• AUT: The backlight will switch on when a key is pressed but will
switch o automatically after 5 seconds.
5. When the desired setting is displayed, press the
MENU
F
key to exit the
menu or wait a few seconds for the menu to time-out.