GME TX6600PRO - Power Save; Radio Information

TX6600PRO INSTRUCTION MANUAL
32
POWER SAVE
The Power Save function is designed to conserve power and extend the battery
life by letting the radio sleep during periods of inactivity. If you intend to use your
TX6600PRO for long periods of time between charges you should consider using
the power saving mode.
The Power Save option is switched o by default.
To select the Power Save options:
1. Hold the
MENU
F
key to access the menu. The last selected menu item
will be displayed.
2. Rotate the Channel knob or press the keys until PWRSAV is
displayed.
3. Press the
MENU
F
key.
4. Rotate the Channel knob or press the keys to select OFF, LO
or HI.
• Select OFF to switch the Power Save function O. The radio will
remain active at all times and will draw the most amount of power
from the battery.
• Select LO to enable the Power Save function at a conservative
setting. The radio will sleep during periods of inactivity but will
respond quickly to incoming signals.
• Select HI to enable the Power Save function at a more aggressive
setting. The radio will conserve the most amount of power but
may not be as responsive to incoming signals.
5. When the desired setting is displayed, press the
MENU
F
key to exit the
menu or wait a few seconds for the menu to time-out.
For additional tips on conserving power please read the section “Conserving your
Battery Power” later in this manual.
RADIO INFORMATION
The menu has an INFO option to provide hardware, rmware and identity
information about your radio.
To view your radio information:
1. Hold the
MENU
F
key to access the menu. The last selected menu item
will be displayed.