GME TX6600PRO - CTCSS and DCS Tones

TX6600PRO INSTRUCTION MANUAL
45
2. Hold the
MENU
F
key to access the menu. The last selected menu item
will be displayed.
3. Turn the Channel knob or press the keys to access the
SUBTONE option.
4. Press the
MENU
F
key.
5. Use the keys to step through the range of available CTCSS/DCS
codes while the channel is busy. Press for DCS tones or for
CTCSS tones. When the correct code is selected, the mute will open
and you will be able to hear the signal in the speaker.
SELCALL
OVERVIEW
Selective Calling (SelCall) uses unique SelCall Identication numbers (Idents)
to selectively call other radios. Each radio is identiable by its own SelCall
Ident allowing it to be called either individually or as part of a group. If your
TX6600PRO’s Ident is called by another radio, your radio will alert you to the call.
If you are unavailable when the call is received, the callers Ident will be displayed
on your radio allowing you to call them back on your return.
Your TX6600PRO is factory programmed with its own unique 5 digit SelCall Ident.
You should make your SelCall Ident known to anyone who may need to call you
using SelCall. If an incoming SelCall matches your radio’s Ident, your radio will
alert you to the call.
QUIET Mode
The QUIET mode works with the SelCall function to ensure the radio remains quiet
to all incoming signals unless your SelCall Ident is received. In this way, your radio
can monitor a busy channel without disturbing you, but still let you know when
you are being called. When QUIET mode is enabled, you may see the busy
icon appear on the display indicating the channel is in use but nothing will be
heard in the speaker.
The QUIET mode can be enabled on individual channels allowing you the freedom
to choose which channels will remain quiet and which will stay open to all
incoming signals. Once your SelCall Ident is received, the QUIET mode is cancelled
allowing you to converse normally on the channel.