GME TX6600PRO - LCD Backlight Settings

TX6600PRO INSTRUCTION MANUAL
30
To activate Channel Announce:
1. Hold the
MENU
F
key to access the menu. The last selected menu item
will be displayed.
2. Rotate the Channel knob or press the keys until CH ANN is
displayed.
3. Press the
MENU
F
key.
4. Rotate the Channel knob or press the keys to select ON or
OFF.
5. When the desired setting is displayed, press the
MENU
F
key to exit the
menu or wait a few seconds for the menu to time-out.
DISPLAY OPTIONS
The DISPLAY option allows you to choose the information that is displayed on the
LCD in the space below the channel number. The default setting is S-MET which
displays the incoming signal strength in logarithmic format using values from
0 - 9+.
To select a dierent Display option:
1. Hold the
MENU
F
key to access the menu. The last selected menu item
will be displayed.
2. Rotate the Channel knob or press the keys until DISPLAY is
displayed.
3. Press the
MENU
F
key.
4. Rotate the Channel knob or press the keys to select one of
the options listed below.
• S-MET: Displays the incoming signal strength in the traditional
logarithmic format using values from 0 - 9+.
• S-LIN: Displays the incoming signal strength in linear format.
• BATT V: Displays the battery voltage.
• CHNAME: Displays the name associated with the selected
channel.
• RXFREQ: Displays the selected channel’s receiver frequency.
• TXFREQ: Displays the selected channel’s transmitter frequency.
• FREQ: Displays the selected channel’s receiver frequency when
receiving and the transmitter frequency when transmitting.