GME TX6600PRO - Busy Lockout Feature

TX6600PRO INSTRUCTION MANUAL
24
To enable Busy Lockout:
1. Hold the
MENU
F
key to access the menu. The last selected menu item
will be displayed.
2. Rotate the Channel knob or press the keys until BUSYLK is
displayed.
3. Press the
MENU
F
key.
4. Rotate the Channel knob or press the keys to select ON or
OFF.
5. When the desired setting is displayed, press the
MENU
F
key to exit the
menu or wait a few seconds for the menu to time-out.
NOTE: You can also press the SQUELCH key to open the Squelch and listen for
signals on the channel before transmitting.
TIME-OUT TIMER
The TX6600PRO has a built-in time-out timer that automatically limits
transmissions to a maximum of 3 minutes of continuous operation. This feature is
required by the ACMA to prevent accidental blocking of the frequency should your
PTT key become jammed or be otherwise pressed accidentally.
When the time-out timer activates, the transmission will stop, the radio will emit
a long beep, and TXTIMEOUT will be displayed. Once the PTT key has been
released normal operation will be restored.
ROGER BEEP
The Roger Beep setting applies a short tone to the end of your transmission to
alert the receiving party that your transmission has ended.
To enable or disable the Roger Beep tone:
1. Hold the
MENU
F
key to access the menu. The last selected menu item
will be displayed.
2. Rotate the Channel knob or press the keys until RGBEEP is
displayed.
3. Press the
MENU
F
key.
4. Rotate the Channel knob or press the keys to select OFF or
ON.