EasyManua.ls Logo

GO Systemelektronik BlueBox - UMTS Settings

GO Systemelektronik BlueBox
77 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BlueBox
GO Systemelektronik GmbH Faluner Weg 1 24109 Kiel Germany Tel.: +49(0)431-58080-0 Fax: -58080-11
Page 51 / 77
www.go-sys.de info@go-sys.de
8.2.1.4.4 UMTS settings
From this menu, you set up your UMTS connection. For APN, username and password, contact your UMTS
provider.
The routing must be switched on, if you use this BlueBox as an Internet router. This is for example the case,
when via this BlueBox other BlueBoxes send measured values.
Please note that the connected BlueBoxes must use the IP address of the routing BlueBox as the address of
the default gateway see (8.2.1.1.3).
<–
UMTS settings
APN
Username Password
Routing disabled
Modem menu 8.2.1.4
Input APN (Access Point Name)
Input Username (Login name)
Input Password (Login password)
Switches the routing on and off.
The button is also a status indicator.
Factory default: routing off
Switches back to the Modem Menu.
UMTS
APN
Username
Password
Routing enabled
Routing disabled
<–

Table of Contents