BlueBox
GO Systemelektronik GmbH Faluner Weg 1 24109 Kiel Germany Tel.: +49(0)431-58080-0 Fax: -58080-11
Page 58 / 77
www.go-sys.de info@go-sys.de
8.2.3.1 Interval and Average
Interval: Period in seconds between the end of a measurement and the end of the next measurement.
Choose the interval according to the characteristics of the sensor. Each sensor requires a certain minimum
period for measuring a value.
Please note the data sheet of the sensor.
The higher the interval is set, the fewer measurements are taken, the shorter the download time.
Averaging: The measured value is the arithmetic average of the selected number of single measurements.
Current settings are displayed as "Actual value".
Interval
Aktual value 60
1 2 3
4 5 6
7
0
8 9
<
<–
Ok
Average
Aktual value 6
1 2 3
4 5 6
7
0
8 9
<
<–Ok
measurement cycle
interval
new
measurement
measuring
time
single
measurements
(here 5)
Sensor menu 8.2.3
Deletes the last entered character.
Saves the input and switches back to the Sensor menu.
Switches back to the Sensor menu without saving the input.
To Next Page
Loading...