BlueBox
GO Systemelektronik GmbH Faluner Weg 1 24109 Kiel Germany Tel.: +49(0)431-58080-0 Fax: -58080-11
Page 59 / 77
www.go-sys.de info@go-sys.de
8.2.3.2 Calibration
The BlueBox allows calibration of sensors in the connected state. Calibration is password protected, see: 7
Switching on the BlueBox and password input.
A detailed description of the calibration can be found at:
Appendix B / Calibrating a pH sensor
Appendix C / Calibration of an oxygen sensor
09:19:39
10.07.10
<–Set
Oxygen
O x y gen c alibr a tion
0.0 mg/l
Sensor menu 8.2.3
Switches to the input of the first measuring point.
Switches back to the sensor menu.