BlueBox
GO Systemelektronik GmbH Faluner Weg 1 24109 Kiel Germany Tel.: +49(0)431-58080-0 Fax: -58080-11
Page 76 / 77
www.go-sys.de info@go-sys.de
Appendix F - Opening a BlueBox housing
Shut down the BlueBox.
Disconnect the BlueBox from the power supply.
1. Remove the covers on both sides of the BlueBox.
2. Unscrew the four fixing screws.
3. Open the housing by hinging the cover from the front to the back.
In the cover there is the mainboard.
This work must be carried out by qualified persons using suitable tools.
To Next Page
Loading...