Graco Pro Xp L40T10 - Technical Data

Technical Data
Technical Data
Electrostatic Air Spray Guns
U.S.
Metric
Maximum Working Fluid Pressure 100 psi 0.7 MPa, 7.0 bar
Maximum Wor
king Air Pressure
100 psi 0.7 MPa, 7.0
bar
Minimum Air
Pressure at Gun Inlet
45 psi 0.32 MPa, 3.2 bar
Maximum Fl
uid Operating
Temperatu
re
120°F 48°C
Paint Resistivity Range
3 megohm/c
m to infinity. For a table of electrostatic results at different
resistan
ce levels, see Check Fluid Resistivity, page 26.
Air Inlet Fitting
1/4 npsm(
m) left-hand thread
Fluid Inlet Fitting
3/8 npsm
(m)
Output
Voltage
ProXp40Models: 40kV
Pro Xp6
0 Models: 60 kV
ProXp85Models: 85kV
Maximum Current Draw
125 mic
roamperes
Sound Power (measured per ISO
Standard 9216)
at 40 psi: 90.4 dB(A)
at 100 psi: 105.4 dB(A)
at 0.28 MPa, 2.8 bar: 90.4 dB(A)
at 0.7 MPa, 7.0 bar: 105.4 dB(A)
Sound Pressure (measured 1 m
from gun)
at 40 psi: 87.0 dB(A)
at 10
0psi: 99.0dB(A)
at 0.28 MPa, 2.8 bar: 87.0 dB(A)
at 0.
7 MPa, 7.0 bar: 99.0 dB(A)
Wetted Parts PEEK, UHMWPE, FEP, PTFE, acetal, nylon, polyethylene
3A2494E
77