UCM630xA Series User Manual
Version 1.0.9.10
Table 53: Batch Add SIP Extension Parameters
Specify the number of extensions to be added. The default setting is 5.
Select how much to increment successive extensions. For example, if the value is 2,
the extensions will be 1000,1002,1004,...... Note: Up to 3 characters.
Configure the starting extension number of the batch of extensions to be added.
Assign permission level to the user. The available permissions are "Internal", "Local",
"National" and "International" from the lowest level to the highest level. The default
setting is "Internal".
Note: Users need to have the same level as or higher level than an outbound rule's
privilege to make outbound calls from this rule.
Configure Voicemail.
There are three valid options and the default option is "Enable Local Voicemail".
Disable Voicemail: Disable Voicemail.
Enable Local Voicemail: Enable voicemail for the user.
Enable Remote Voicemail: Forward the notify message from remote
voicemail system for the user, and the local voicemail will be disabled. Note:
Remote voicemail feature is used only for Infomatec (Brazil).
Configure the SIP/IAX password for the users. Three options are available to create
password for the batch of extensions.
User Random Password.
A random secure password will be automatically generated. It is recommended
to use this password for security purpose.
Use Extension as Password.
Enter a password to be used on all the extensions in the batch.
Configure Voicemail password (digits only) for the users.
To Next Page
Loading...
Need help?
General
