UCM630xA Series User Manual
Version 1.0.9.10
this would allow one-button voicemail access. By default, this option is disabled.
Check this box to disable this extension.
Select voice prompt language for this extension. If set to "Default", the global setting
for voice prompt language will be used.
Configure the maximum number of calls allowed for each remote IP address.
Configure to enable/disable requiring call token. If set to "Auto", it might lock out
users who depend on backward compatibility when peer authentication credentials
are shared between physical endpoints.
The default setting is "Yes".
Enable/disable SRTP for RTP stream encryption.
Access Control List manages the IP addresses that can register to this extension.
Allow All: Any IP address can register to this extension.
Local Network: Only IP addresses in the configured network segments can
register to this extension.
Configure the codecs to be used.
Call Forward
Unconditional
Enable and configure the Call Forward Unconditional target number.
Select time condition for Call Forward Unconditional. CFU takes effect only during the
selected time condition. The available time conditions are “Office Time”, “Out of Office