FHO5000
Warning
Use the Correct Power Supply
Before connecting the power cord, ensure that the source voltage matches the rated supply voltage of the AC adapter and
that it is within the maximum rated voltage of the provided power cord.
Use the Correct Power Cord
Use only the power cord that comes with the instrument. Do not use it for other devices.
Use the Correct AC Adapter
Use only the AC adapter specified for the instrument. Do not use it for other devices.
Use Only the Designated Battery pack
Use only the battery pack specified for the instrument. Do not use it for other devices.
Do Not Look at the Laser Light
Do not look at the laser’s direct ray, reflected ray from a mirror, or indirect ray without the proper protective eyewear. In
addition, avoid being exposed to the laser light. It can cause blindness or damage to the eye.
Do Not Operate in an Explosive Atmosphere
Do not use the thermocouple in a location where any flammable or explosive gas/vapor is present. Operation in such an
environment constitutes a safety hazard.
Do Not Remove Covers
The covers should be removed by qualified personnel only.
Opening the cover is dangerous, because some areas inside the instrument have high voltages.
Carrying and Moving the Instrument
Remove all power cords and connection cables from the main unit before moving the instrument. When carrying the
instrument, hold it firmly by the handle. Also, if storage media is inserted into the instrument, always remove the storage
media before carrying or moving the instrument. Never leave the media inserted when carrying or moving. The storage
media can become damaged.
To Next Page
Loading...
Need help?
General
