GRAPHTEC FC9000-75 - Replacing the Pen Block Cover

FC9000-UM-251-9370 7-10
7 DISASSEMBLY AND REASSEMBLY
7.1.10 Replacing the Pen Block Cover
How to detach the pen block cover
(1) Remove the two M3L6 binding head screws holding the pen block cover.
Pen block cover
M3L6 binding head screw
(2) Detach the pen block cover.
There is a hook inside of this part.
While pressing the top of pen block
cover a little bit, pull out the pen
block cover from the bottom of pen
block.
How to reinstall the pen block cover
(1) Reattach the pen block cover in the reverse order in which it was detached.