GRAPHTEC LABELROBO LCX603 - Page 52

LCX603-UM-651-9370 2-44
2 Setup
(12)Holdtheangesectioninthereversesidealsoandsetitintotheribboncassette.Pushuntilthereis
aclickingsound.
(13)Makesuretheinkribbonisnotslack.Rolluptheribbonifitisslack.
Rewinduntilthetransparentlmisnolongervisible.
Makesuretherearenowrinklesintheinkribbon.Missingtextoccurswhentherearewrinkles.
(14)Settheribboncassetteintheribbonstocker.
(15)Setotherinkribbonofheadsinthesameprocedure.
Setnon-blackinkribbonsinribbon1(Head1)andribbon2(Head2)
Conrmtheblackinkribbonissetforribbon3(Head3).