-38-
Model G1026 (Mfd. Since 10/13)
SECTION 5: ACCESSORIES
ACCESSORIES
Installing unapproved accessories may
cause machine to malfunction, resulting in
serious personal injury or machine damage.
To reduce this risk, only install accessories
recommended for this machine by Grizzly.
NOTICE
Refer to our website or latest catalog for
additional recommended accessories.
order online at www.grizzly.com or call 1-800-523-4777
W1110—
1
⁄2" Rub Collar, 1
1
⁄8" Outside Dia.
W1111—
1
⁄2" Rub Collar, 1
1
⁄4" Outside Dia.
W1112—
1
⁄2" Rub Collar, 1
3
⁄8" Outside Dia.
W1113—
1
⁄2" Rub Collar, 1
1
⁄2" Outside Dia.
W1114 —
3
⁄4" Rub Collar, 1
5
⁄8" Outside Dia.
W1116—
3
⁄4" Rub Collar, 1
3
⁄4" Outside Dia.
W1118 —
3
⁄4" Rub Collar, 1
7
⁄8" Outside Dia.
W1119 —
3
⁄4" Rub Collar, 2" Outside Dia.
W1120 —
3
⁄4" Rub Collar, 2
1
⁄8" Outside Dia.
W1122—
3
⁄4" Rub Collar, 2
5
⁄8" Outside Dia.
If you do any kind of irregular shaping, rub col-
lars are a must! Rub collars are used for shaping
curved work such as cathedral doors, as well as
many custom shapes. They are also used for
limiting depth-of-cut, like guide bearings on router
bits.
Figure 56. Ball bearing rub collars.
W1159 —Spacer
1
⁄2" Bore, 1" OD,
1
⁄4" High
W1160 —Spacer
1
⁄2" Bore, 1" OD,
3
⁄8" High
W1161—Spacer
1
⁄2" Bore, 1" OD,
1
⁄2" High
W1162—Spacer
1
⁄2" Bore, 1" OD,
3
⁄4" High
W1163—Spacer
1
⁄2" Bore, 1" OD, 1" High
Spacers allow you to position your shaper cutter
anywhere on the spindle. Use them between cut-
ters or stack them above the cutter to bear against
the spindle nut. Every shaper owner needs a set
of these on-hand.
Figure 55. Shaper spindle spacers.
Figure 54. G4179 Power Feeder.
G4179—
1
⁄2 HP Power Feeder
If you do any kind of hand ripping or milling, you
know what a big chore it can be especially with
longer and wider stock. For those of you who
want to increase production, upgrade or add on
an extra stock feeder, we have one that will match
virtually any application and budget.
To Next Page
Loading...
Need help?
General
