GSE 250 - Printing

Page 52 250 Technical Reference
P
P
R
R
I
I
N
N
T
T
I
I
N
N
G
G
The Model 250 comes standard with a single fixed printing format that is as follows:
The first line contains a six digit sequential ID number that is automatically incremented with each
printing, up to a maximum of 999999. The first line also contains the current date and time.
The second line shows the displayed reading, units and G for Gross or N for Net.
If counting is active, the printout has a third line for the counting information (p for pieces) as
follows:
Counting:
000168 06/03/2007 12:58
8.27 lb G
10 p G
0.00 lb T
8.27 lb N
Whenever a new sample is taken, the indicator prints the sample in the following format:
SAMPLE: 10 p = 6.17 lb
In addition to the printout, the indicator accumulates the weight, prints the accumulated total and
number of accumulations. A long press of the [PRINT] key will print a ticket and clear these
totals. The six digit sequential ID number is not cleared.
Accumulation: Accumulation with count:
If the count mode is enabled each of the individual printouts would have a third line as discussed
above and the TOTAL would have an additional QTY line as follows:
000048 12/05/2006 15:10
121.4 lb G
5.3 lb T
116.1 lb N
GROSS ITEMS: 3
TOTAL GROSS: 29.68 lb
NET ITEMS: 2
TOTAL NET: 18.82 lb
GROSS ITEMS: 5
TOTAL GROSS: 11.45 lb
NET ITEMS: 0
TOTAL NET: 0.00 lb
NET QTY: 89 p