GSE 250 - Page 73

Version 2.4 Page 73
S
S.in P, 24
Safe setup access code, 19, 24
SAFE.PC, 24, 62
Scale
setting capacity, 15
SCALE, 28, 62
Scale base test display, 28, 62
Scale Build, 23
Sealing
audit trail, 38
physical seal, 38
Selections and options, 15
Serial
baud rate, 26
master output, 45
output type, 26
parity, 27
RS-232, 8
SERIAL, 26, 62
Set hour, 28, 62
Set minute, 62
Set minutes, 28
Set month, 28, 62
Set year, 28
SET.PTS, 27, 62
Setpoint
connection, 41
high target, 27
low target, 27
operation, 41
output connection, 10
Setpoint settings, 27, 62
Setpoints
weight source, 27
Setup access button, 23
Setup display prompts, 20
Setup errors, 55
Setup lock out, 20
Setup menu quick reference, 62
Setup mode annunciators, 14
Setup parameters, 21
SHOW.T, 31
Sigma-Delta A/D converter, 1
SPAN, 24, 34, 62
SPEC, 24, 62
Special functions, 29
accumulation, 31
count, 29
hold, 30
live weight averaging, 30
peak hold, 30
test, 29
units, 30
Specifications, 2
Stability considerations, 16
Status annunciators, 14
T
Tare
legal for trade, 37
Tare key, 16
setup mode, 15
weigh mode, 15
TARG.HI, 62
TARG.LO, 62
Target
high, 27, 62
low, 27, 62
Target annunciators, 14
Targets, 41
Technical reference manual, 2
Test
scale base, 28
TEST, 28, 29, 62
Time & Date, 3
TYPE, 26, 62
U
Units, 30
UNITS, 22, 30, 62
Units display, 13
USE, 22, 62
W
Weighing errors, 55
Weight display, 13
Y
YEAR, 28, 62
Z
Z.BAND, 23, 62
Z.in P, 34
Z.RANGE, 23, 62
Z.TRAC, 23, 62
Zero
initial, 23
ZERO, 34, 62
Zero annunciator, 14
Zero band, 23, 62
Zero band annunciator, 14
Zero calibration, 23
Zero key, 16
setup mode, 15
weigh mode, 15
Zero operating range, 23
Zero tracking, 23