GSM M2BX - Delete Wireless Sensors; Defense Zone Place Setting

7
System Settings
Fig 4A: recognize successfully
Fig 4B: the host has the same
code with sensor code
Fig 5: press ENTER to save
Back
Save
Error
Repeat code
Zone 1
Back
Save
241015162
Normal code
Zone 1
5. Delete Wireless Sensors
The wireless detector can't control the main panel after it's deleted.
Method: enter defense zone setting menu, press “4” or “6” to choose
the sensor you want to delete. Press “8” to find “delete”, and then
press ENTER.
6. Defense Zone Place Setting
The location of defense zone can be set in the main panel, so that the
panel can send correspondent alarm message. There are 8 locations
for alarm: SOS, fire, gas, door, hall, window, balcony, and boundary.
Operation figures:
Pair
Delete
Zone 1
Back
Enter
Zone
Enter
Exit
Fig 1: enter defense zone setting
Fig 2: choose zone number Fig 3: choose Delete and press
ENTER
Back
Save
Exit
Enter
Enter
Exit
Fig 1: enter defense zone setting
Fig 2: choose zone number and
press ENTER
Fig 3: waiting signal from sensor
000000000
Trigger sensor
Zone 1Zone 1
Pair
Delete
Zone
Enter
Exit
Enter
Back
Delete completed
Save completed
Save
Back