Operation Instructions
30
8. Alarming Record Checking
This alarm system can store 30 alarm records. When the record
number exceeds 30, the most previous record will be deleted
automatically.
The icon [ ] will keep flashing if there's alarm record not been
checked.
Checking method: In disarm state, input [ESC] button on the panel,
you can check the alarm record. Press “4” or “6” to upturn or downturn,
and press “ESC” to exit checking. If there's not alarm record, it will
display “No alarm record”.
6. Emergency Help
Alarm SMS: SOS alarm!
Main panel operation: press [SOS].
7. System Dialing Function
During disarm status, you can use the main unit to make any call just
like using a land-line telephone. Dial telephone number on keypad,
press [CALL] button, the main unit will make a beep and the LCD
screen will display the number you are calling. After the call, press
[CALL] button again, the call will be hanged up and main unit will be in
disarm status.
Sometimes, an accident may happen, e.g. a senior person or child
suddenly becoming ill or being in great pain, a fire emergency, burglar
intrusion. Press [SOS] button on keypad, or [SOS] button on remote
controller or wireless panic button, the main unit will alarm and make
call to the preset user numbers.
Remote control operation: press button on the remote control. [SOS]
Press [4]: two-way intercom for 30 seconds. You can't operate the main
unit during this time.
Alarm SMS: X remote control SOS alarm (X: the remote control serial
number 1~8).
To Next Page
Loading...