Operation Instructions
28
3. Disarm
The purpose of disarming the system is to let it not in alert status. One
way is normal disarming after operation of arming, and the other is to
stop the main unit alarming. After the operation of disarm, all the
defense zones except 24-hour zone shall not work.
Use main panel keypad to input operate password + ENTER. The
screen will display “system disarmed”.
Remote controller operation: press disarm button [ ] on the remote
controller.
Main panel operation: password+ENTER
SMS operation: send “operate password#1#” (default operate
password: 123456).
Home arm
11:49 11/26/2013
System Disarmed
11:49 11/26/2013
To Next Page
Loading...
