5.5.2 Memory (MEMORY)
The “MEMORY” screen is used to control memory.
Settings saved (stored) to store/recall memory No. 1 to No. 30 can be recalled and used.
Recall of store/recall memory contents can be executed only when output is off.
See “4.8 Using Memory Functions”, for description of store/recall memory.
After selecting one of the following operations, use the selection box to specify the target memory
number.
STORE...: Stores settings to specified memory number.
RECALL...: Recalls settings from specified memory number.
CLEAR...: Clears settings in specified memory number.
To Next Page
Loading...
