GW Instek APS-1102A - Page 59

3 PANEL AND BASIC OPERATIONS
APS-1102A
3-25
 Operation steps
To set the output voltage, set in the SET menu.
1. Press the or key to move the cursor to the icon.
ENTERCANCEL
Cursor
2. Press the
ENTER
key to display the modification box.
ENTERCANCEL
Modification box
3. Press the and keys to move the cursor to the digit to be changed, turn the MODIFY dial
and set a numerical value. The set value will be reflected in output immediately.
Increase
Decrease
4. Press the
CANCEL
or
ENTER
key to close the modification box.