GW Instek APS-1102A - Page 65

3 PANEL AND BASIC OPERATIONS
APS-1102A
3-31
3. Press the
ENTER
key to display the LIMIT screen.
ENTERCANCEL
4. Press the or key to move the cursor to the item to be set.
ENTERCANCEL
Cursor
5. Press the
ENTER
key to display the modification box.
ENTERCANCEL
Modification box
6. Press the and keys to move the cursor to the digit to be changed, turn the MODIFY dial
and set a numerical value. The set value will be reflected in output immediately.
Increase
Decrease
7. After setting all of the items, press the
CANCEL
or
ENTER
key to close the modification box.