GW Instek APS-1102A - Page 91

4 ADVANCED OPERATION EXAMPLE
APS-1102A
4-19
2. Press the or key to move the cursor to “RESET Ipkh…”, then press the
ENTER
key.
 The EXEC box is displayed.
ENTERCANCEL
EXEC box
3. When “EXEC” is displayed, press the
ENTER
key.
 The peak current hold value is reset.
ENTERCANCEL
4. Press the TOP MENU key or CANCEL key to return to the SET menu screen.
 The peak current hold value shown in measured value window becomes 0 Apk.