Waveform
operation
Waveforms can be moved or scaled in both the
Run and Stop mode. For details, see page66
(Horizontal position/scale) and page70 (Vertical
position/scale).
Changing the horizontal position and scale
For more detailed configurations, see page66.
Setting the
horizontal
position
The horizontal position knob
moves the waveform left or right.
The position indicator moves along with the
waveform and the distance from the center point is
displayed as the offset in the upper side of the
display.
GDS-1000A Series User Manual
44
Selecting the
horizontal scale
To select the timebase (scale), turn
the TIME/DIV knob; left (slow) or
right (fast).
TIME/DIV
Range 1ns/Div ~ 10s/Div, 1-2.5-5 increment
Changing the vertical position and scale
For more detailed configuration, see page70.
Set vertical
position
To move the waveform up or
down, turn the vertical position
knob for each channel.
As the waveform moves, the vertical position of
the cursor appears at the bottom left corner of the
display.
Run/Stop mode
The waveform can be moved
vertically in both Run and Stop
mode.
Select vertical
scale
To change the vertical scale,
turn the VOLTS/DIV knob; left
(down) or right (up).
VOLTS/DIV
Range
2mV/Div ~ 10V/Div, 1-2-5 increments
The vertical scale indicator for each channel on the
bottom left of the display changes accordingly.
To Next Page
Loading...
