MEASUREMENT
51
7. Press F2 repeatedly to
change the channel for
Source2.
Range
CH1, 2, Math
View all
measurements
8. Press F3 to view all
measurement items.
9. All the measurements
appear in the center of the
screen.
10. Press F3 to return.
Note: All the editing operations can still be
performed when viewing all the measurement
items.
11. Press Previous Menu to
confirm the item selection
and to go back to the
measurement results view.
GDS-1000A Series User Manual
52
Cursor Measurements
Cursor lines, horizontal or vertical, show the precise position of the
input waveforms or the math operation results. The horizontal
cursors can track time, voltage and frequency, whilst the vertical
cursors can track voltage. All measurements are updated in real-
time.
Using the horizontal cursors
Procedure
1. Press the Cursor key. The
cursors appear in the
display.
Cursor
2. Press X↔Y to select the
horizontal (X1&X2) cursor.
3. Press Source repeatedly to
select the source channel.
Range
CH1, 2, MATH
4. The cursor measurement results will appear in
the menu, F2 to F4.
Parameters X1
Time position of the left cursor. (relative to
zero)
X2
Time position of the right cursor. (relative
to zero)
X1X2
The difference between the X1 and X2.
∆: us
The time difference between X1 and X2.
f: Hz
The time difference converted to
frequency.
To Next Page
Loading...
