SAVE/RECALL
105
Recalling a reference waveform to the display
Procedure
1. The reference waveform must be stored in
advance. See page 98 for details.
2. Press the Save/Recall key.
Save/Recal
3. Press Display Refs. The
reference waveform display
menu appears.
4. Select the reference
waveform, Ref A or Ref B,
and press it. The waveform
appears on the display and
the period and amplitude of
the waveform appears in the
menu.
5. To clear the waveform from
the display, press RefA/B
again.
Recalling panel settings
Procedure
1. (For recalling from an
external SD card) Insert the
card into the slot.
2. Press the Save/Recall key.
Save/Recal
GDS-1000A Series User Manual
106
3. Press Recall Setup.
4. Press Source repeatedly to
select the file source,
internal or external
memory. Use the Variable
knob to change the memory.
Memory
Internal memory, S1 ~ S15
SD card
External card, no practical
limitation on the amount of file. The
setup file must be placed in the root
directory to be recognized.
5. Press Recall to confirm
recalling. When completed,
a message appears at the
bottom of the display.
Note
The file will not be recalled if the
power is turned Off or the SD card
is disconnected before completion.
File utilities
To edit SD card contents
(create/ delete/ rename files
and folders), press File Utilities.
For details, see page91.
Recalling a waveform
Procedure
1. (For recalling from an
external SD card) Insert the
card into the slot.
2. Press the Save/Recall key.
Save/Recal
To Next Page
Loading...
