GW Instek GDS-1062A - Panel Overview; Front Panel

GETTING STARTED
13
Panel Overview
Front Panel
LCD display
TFT color, 320 x 234 resolution, wide angle view
LCD display.
Function keys:
F1 (top) to
F5 (bottom)
Activates the functions which
appear in the left side of the LCD
display.
Variable knob
VARIABL
E
Increases or decreases values and
moves to the next or previous
parameter.
Acquire key
Acquire
Configures the acquisition mode
(page59).
Display key
Display
Configures the display settings
(page64).
Cursor key
Cursor
Runs cursor measurements
(page52).
(Continued on next page)
GDS-1000A Series User Manual
14
Utility key
Utility
Configures the Hardcopy function
(page94), shows the system status
(page82), selects the menu
language (page86), runs the self
calibration (page111), configures
the probe compensation signal
(page112), and selects the USB
host type(page83).
Help key
Help
Shows the Help contents on the
display (page39).
Autoset key
Autoset
Automatically configures the
horizontal, vertical, and trigger
settings according to the input
signal (page41).
Measure key
Measure
Configures and runs automatic
measurements (page47).
Save/Recall key
Save/Recal
l
Saves and recalls images,
waveforms, or panel settings
(page87).
Hardcopy key
Hardcop
y
Stores images, waveforms, or
panel settings to an SD card
(page94), or prints screen images
to a PictBridge compatible printer
(page109).
Run/Stop key
Run/Stop
Runs or stops triggering (page42).
Trigger level knob
LEVE L
TRIGGE
R
Sets the trigger level (page75).
Trigger menu key
MENU
Configures the trigger settings
(page75).
Single trigger key
SINGLE
Selects the single triggering mode
(page82).